Publicité
REF.54581
TROUBLE SHOOTING TABLE
Problem
The turntable rotate just in
one direction or can't rotate.
Demount or fix the wheel, the
turntable can't lock (spin with
wheel);
The jaws delay to open/clo-
se; The turntable locks the rim
incorrectly.
The mounting/demounting
head always touch the rim
during operation.
The Bead Breaker Pedal and
Jaw open and close Pedal
can't turn back to the original
position.
The Bead Breaker shovel
operates difficultly.
PARTS LIST (EXTENDED VIEW)
Code
Order code
200-10
C-200-500000-0
226
S-005-020075-0
227
S-000-063265-0
200-228
C-200-540000-0
232
S-000-019262-0
306
S-000-016265-0
307
S-000-020265-0
200-308
S-000-180500-0
804
S-033-200002-2
Reason
Reverse Switch broken
Belt broken
The Motor's malfunction
Leakage of Air network
The clamping cylinder
can't work.
Worn jaws
Broken washers of the
chuck cylinder
The locking plate
incorrectly adjust or
unqualified.
Screws on the chuck
loose; the Hexagonal
Vertical Arm can't be
locked by Locking Plate
pedal spring broken
Jammed silencer
The washer on the
Bead Breaker cylinder is
broken.
Name
Code
Bead breaker
311
buffer
V seal 20*28*7.5
200-321
O seal 63*2.65
331
clamp cylinder
200-426
piston Ø70
O seal Ø19.6×2.62
521
O- seal Ø 16*2.65
200-532
O- seal 20*2.65
604
O- seal 180×5
702
oil fog maker
801
· 25 ·
Solution
Replace the Reverse Switch
Replace the belt
Check the motor cable or terminal
block wire; Replace the motor if it was
broken.
Check all the parts on the air network.
Replace the cylinder piston.
Replace the jaws.
Replace it.
Replace or adjust it.
Tighten the screws; replace the
Locking Plate.
Replace it.
Clean it or replace it.
Replace it.
Order code
Name
S-005-168115-0
V seal 185×168×10.8
S-000-175500-0
O seal Ø173.4×5.3
S-000-019262-0
O- seal Ø 19.6*2.62
S-060-016000-1
Reverse switch
S-000-030355-0
O seal Ø 30*3.55
S-000-059262-0
O seal 59.9*2.62
S-042-000686-0
Tyre changer belt A-28
C-200-900000-0
Air hose
S-033-200002-1
Relief pressure filter
Publicité
