Publicité
EN
INSTRUCTION MANUAL
PRODUCT'S PRESENTATION
The semi-automatic tire changer is specially designed for tire dismounting/mounting on rims.
SAFETY INSTRUCTIONS
Read carefully this owner's manual before using the product.
Failure to comply with these instructions could result in personal injury and/
or damageto the product. Please keep the instructions for future reference.
The manufacturer is not responsible for damage caused by failure to comply with these instruc-
tions. The use of the machine is reserved for qualified personnel who have previously read and
understood the manual thoroughly, and for those with previous experience with similar machi-
nery. Any changes beyond the scope of use in this machine without the manufacturer's permis-
sion or in disagreement with the manual may cause malfunction and damage to the machine,
and the manufacturer may cancel the warranty coverage. If any parts are damaged for any
reason, replace them according to the spare parts list.
(Attention: the warranty is for one year from the manufac-
turer's delivery date; the warranty excludes easily breakable
parts).
• Do not place hands under the mounting/dismounting
head during operation;
• Do not place hands between the jaws during operation;
• Do not place hands inside the tire bead during dis-
mounting;
• Ensure and verify that the system is equipped with a
good grounding circuit;
• Do not place feet between the bead breaker and the
body during operation;
• Do not work without warning labels.
TECHNICAL SPECIFICATIONS
Outer wheel clamp
Inner wheel clamp
Maximum wheel diameter
Maximum wheel width
Working pressure
Power supply
Optional motor power
Maximum rotation torque (turntable)
Overall dimensions
Noise level
NOTE: The tire dimensions are based on iron tires; aluminum tires are thicker.
10 to 19"
12 to 20
1040mm (41")
355mm (14")
8-10 BAR
110V (1 phase) /220V (1 phase) / 380V (3 phases)
0.75/0.55/1.1 Kw
1078Nm
96x76x93cm
75dB
· 20 ·
REF.54581
Publicité
