Publicité
Command and control devices
⚠ For the system to work properly, before fitting any snap-in card (e.g. the AF R800), you MUST CUT OFF
THE MAIN POWER SUPPLY and remove any batteries.
To be able to snap
in the cards into
the dedicated
connectors, raise
the card cover.
Connector for the R800 card (the R800 card is for using the
keypad selector)
Connector for AF card (AF868 or AF43S) for remote control.
Antenna RG58 cable for remote control
OPEN-CLOSE-INVERT function (step-step) from control
device (NO contact). Alternatively, from functions
programming you can activate the OPEN-STOP-CLOSE-
STOP command.
PARTIAL/PEDESTRIAN OPENING feature activated from
control device (contact NO)
STOP STOP(N.C. contact). For stopping the gate while
excluding automatic closing. To resume movement press the
control button or use another control device.
If unused, it should be deactivated during programming.
Keypad selector.
R800
AF
Publicité
