Publicité
Release the gear motor and fasten the driven-arm to the gate-post brace as shown in the drawing.
Ø 12
UNI 6592
⓫
Ø 12
❿
UNI 6593
UNI 5739
Ø 6
M6x10
⚠ If there are no ground stops, you must fit mechanical stops.
Fastening the mechanical stops
Release the gearmotor.
When opening.
Entirely open the gate leaf. Fit the stop under the casing, against the transmission arm and fasten it with the
bolt.
UNI 5931
M8x20
Publicité
