Publicité
Fit the gearmotor into the gate-post brace and tighten the nuts and bolts.
Fit the plug into the gearmotor's drive-shaft hole.
UNI 5931
M8 x 80
❻
Ø 10
❼
UNI 7474
M8
Fasten the transmission arm to the shaft using the slow shaft washer and the screw.
UNI 6593
Ø 14
UNI 5739
M10x14
❽
Fasten the driven-arm to the transmission arm by using the pin, the bolt and the washer.
Ø 12
❾
UNI 6593
Ø 6
UNI 5739
M6x10
Publicité
