Publicité
My smartphone is connected to the BoomBoom 100, but I
do not hear any music through my audio system.
Make sure that your audio system's audio input is properly
connected to the BoomBoom 100's audio output and the
TX/RX switch is in RX mode.
Please ensure that the multifunctional switch is in the correct
position (AUX or OPT).
Check that the volume of your smartphone and the app you
are using are set correctly.
If you are using an optical connection, please ensure nothing
is connected to the aux input.
Low volume level.
In TX mode: check the volume on both your Bluetooth
headphones and your TV, as both may be able to adjust the
volume.
In RX mode: check the volume of your smartphone and the
app you are using. Also check the volume of your audio
system.
I connected my BoomBoom 100 to the headphone jack of
the TV and use my TV's USB port to power the
BoomBoom 100, but I hear a 'buzz' in the audio.
Please use a USB adapter to power the BoomBoom 100, or
use your TV's Toslink connector. In your TV's settings, please
ensure that Toslink is set to PCM Stereo.
Poor audio quality and/or audio stutter.
1. To achieve the most low-noise audio possible, set the
volume on your audio source to the highest possible level.
Then adjust the volume to the desired level on your
headphones.
2. Please ensure that you are within range of your Bluetooth
device.
3. Bluetooth devices are susceptible to interference from other
16
© MARMITEK
Publicité
