Publicité
BoomBoom 100 is ready for pairing. Now slide the
multifunctional switch back to the centre position for optical
connection (OPT), or all the way to the left for analogue
connection (AUX).
The BoomBoom 100 and your headphones or speaker should
both be in pairing mode to establish a connection. The
BoomBoom 100 will remain in pairing mode for up to 30
seconds until the connection has been established. Once the
connection has been established, the LED will turn blue or
green.
The sound from your TV will now be played over your
headphones or speaker.
4.2.4
Pairing a second Bluetooth device
The BoomBoom 100 allows you to pair two Bluetooth
receivers simultaneously. After pairing the first Bluetooth
device, put the second device in pairing mode.
Slide the multifunctional switch (2) all the way to the right (BT).
The LED will now start to blink red/blue, indicating that the
BoomBoom 100 is ready for pairing. Now slide the
multifunctional switch back to the centre position for optical
connection (OPT), or all the way to the left for analogue
connection (AUX).
The pairing with the first Bluetooth device will be momentarily
interrupted, after which both Bluetooth devices will be paired
with the BoomBoom 100. This may take up to two minutes.
4.3
The BoomBoom 100 as a receiver (RX)
The BoomBoom 100 is a slim and compact Bluetooth audio
receiver that digitally streams hifi audio wirelessly from your
smartphone or tablet to your audio system.
10
© MARMITEK
Publicité
