Publicité
METAL BLADE USAGE
NOTE
Choose a suitable recommended cutting attachment according to the object to be cut.
WARNING
• When sharpening, removing, or reattaching the blade, be sure
to wear thick, sturdy gloves and use only proper tools and
equipment to prevent injury.
1. Check the bolt to fasten the blade and be sure the bolt has no
fault, and no abrasion.
2. Be sure that the blade and the holder have been fastened
according to instruction and the blade turns smoothly without
abnormal noise.
WARNING
• The rotating parts fastened incorrectly may cause serious
accident to the operator.
• Make sure that the blade is not bent, warped, cracked,
broken or damaged.
• If you find any error to the blade, discard it and change new
one.
• By using the harness, hang the unit on your right side. Adjust the harness length so that the cutting
head may become parallel to the ground.
WARNING
• Make sure to use harness and cutting attachment
guard. If not, it is very dangerous when you slip or lose
your balance.
Manual_FX-MS152T_Int24_Rev5
50
Publicité
