Télécharger Imprimer la page

FUXTEC FX-MS152T Mode D'emploi page 42

Masquer les pouces Voir aussi pour FX-MS152T:

Publicité

2. And you should carry with you.
(1) Attached tools and files
(2) Properly reserved fuel
(3) Spare blade
(4) Things to notify your working area (rope, warning signs)
(5) Whistle (for collaboration or emergency)
(6) Hatchet or saw (for removal of obstacles)
3. Do not wear loose clothing, jewelry, short trousers, sandals, or go barefoot. Do not wear anything
which might be caught by a moving part of the unit. Secure hair so it is above shoulder length.
WORKING CIRCUMSTANCE
1. Never start the engine inside a closed room or building. Exhaust gases contain dangerous carbon
monoxide.
2. Never use the product:
a. when the ground is slippery or when you can't maintain a steady posture
b. At night, at times of heavy fog, or at any other times when your field of vision might be limited
and it would be difficult to gain a clear view of the working area.
c. During rain storms, during lightning storms, at times of strong or gale-force winds, or at any
other times when weather conditions might make it unsafe to use the product.
WORKING PLAN
1. You should never use the product when under the influence of alcohol, when suffering from
exhaustion or lack of sleep, when suffering from drowsiness as a result of having taken cold
medicine or at any other time when a possibility exists that your judgment might be impaired or
that you might not be able to operate the product properly and in a safe manner.
2. When planning your work schedule, allow plenty of time to rest. Limit the amount of time over
which the product is to be used continuously to somewhere around 30~40 minutes per session, and
take 10~20 minutes of rest between work sessions. Also try to keep the total amount of work
performed in a single day under 2 hours or less.
Manual_FX-MS152T_Int24_Rev5
42

Publicité

loading