Maintenance And Cleaning - Abicor Binzel FES-200 W3 Mode D'emploi

9 Maintenance and cleaning

6 Clean the outside of the fume extraction system using a damp disposable cloth.
7 Dispose of the dust collecting bag and the disposable cloths according to the local regulations.
 12 Disposal on page EN-26
9 Maintenance and cleaning
Scheduled maintenance and cleaning are prerequisites for a long service life and trouble-free operation.
Risk of injury due to unexpected start-up
The following instructions must be adhered to throughout all maintenance, servicing, assembly,
disassembly and repair work:
• Switch off the power source.
• Close off the compressed air supply.
• Disconnect the mains plug.
Electric shock
Dangerous voltage due to defective cables.
• Check all live cables and connections for proper installation and damage.
• Replace any damaged, deformed or worn parts.
NOTICE
• Before performing any maintenance and cleaning work, suitable safety measures must be taken.
• Maintenance and cleaning work on the fume extraction system may only be carried out in areas with
• Maintenance and cleaning work may only be carried out by qualified personnel (in Germany see
• Always wear your personal protective equipment when performing maintenance and cleaning work.
• The personal protective equipment includes protective clothing, safety goggles, respirator mask
EN - 22
DANGER
WARNING
locally filtered forced ventilation.
TRBS 1203).
Class P3, protective gloves and safety shoes.
FES-200 W3