Maintenance And Cleaning - Abicor Binzel SR Serie Mode D'emploi

8 Maintenance and cleaning

8 Maintenance and cleaning
EN - 10
DANGER
Risk of injury due to unexpected start-up
The following instructions must be adhered to for the entire duration of
maintenance, servicing, mounting, dismounting and repair work:
• Switch off the power source.
• Close the gas supply.
• Disconnect the mains plug.
DANGER
Electric shock
Dangerous voltage due to defective cables.
• Check all live cables and connections for proper installation.
• Replace any damaged, deformed or worn parts.
NOTICE
• The maintenance intervals given are recommended values and refer to
single-shift operation.
• Maintenance and cleaning work may only be carried out by qualified
and trained specialists.
• Check coolant hoses, seals, and connections for damage and tightness.
Replace as necessary.
• Always wear your personal protective clothing when performing
maintenance and cleaning work.
The parts of the SR/ABITIG
soiling. This is why these parts must be subjected to regular maintenance and
cleaning:
• Torch body
• Gas nozzle
• Tungsten electrodes
• Back cap
• Body collet
®
GRIP listed below are subject to wear and
®
SR/ABITIG GRIP