Maintenance And Cleaning - Abicor Binzel ABIROB A Mode D'emploi

®
ABIROB A

9 Maintenance and cleaning

Despite the above, scheduled maintenance and cleaning are prerequisites for
a long service life and fault-free operation.
DANGER
Risk of injury due to unexpected start-up
The following instructions must be adhered to throughout all maintenance,
servicing, assembly, disassembly and repair work:
• Switch off the power source.
• Close the compressed air supply.
• Disconnect the mains plug.
DANGER
Electric shock
Dangerous voltage due to defective cables.
• Check all live cables and connections for proper installation and
damage.
• Replace any damaged, deformed or worn parts.
NOTICE
• The specified maintenance intervals are guidance values and refer to
single-shift operation.
• Maintenance and cleaning work may only be carried out by qualified
personnel (in Germany, see TRBS 1203).
• Always wear your personal protective equipment when performing
maintenance and cleaning work.
1 Remove weld spatter.
2 Check that all threaded fittings are tight.
ABICOR BINZEL offers factory repair services.
9 Maintenance and cleaning
EN - 17