Voltage Display For Lithium Rechargeable Batteries - VOLTCRAFT Quadro B6 Notice D'emploi

15. VOLTAGE DISPLAY FOR LITHIUM RECHARGEABLE
BATTERIES
The charger can also display the current voltages of the cells of a lithium rechargeable battery (LiPo, LiIon, LiFe).
For this, the lithium rechargeable battery must have a balancer connection that must be connected to the
respective channel of the charger.
Proceed as follows:
• Select the function „LI BATT METER" in the main menu of the charger with
the button „INC" or „DEC".
• Confirm the selection by pressing the „START/ENTER" button.
Then the voltage display appears.
• Use the buttons „INC" and „DEC" to switch between the individual voltages
and the total voltage or the maximum/minimum cell voltages.
The individual voltage displays depending on the cell number, of course.
The example figure on the right may be a 3-cell LiPo rechargeable battery
(or a multiple-cell LiPo rechargeable battery with defective cells or defec-
tive balancer connections).
After switching with the buttons „INC" and „DEC", the upper display line
shows the total voltage of the connected battery pack.
The lower display line shows the maximum cell voltage („H") on the left
and the minimum cell voltage („L") of all cells of the connected battery pack
on the right. This way, you can see the difference between the voltage
situations of the cells at a glance.
78
PROGRAM SELECT
LI BATT METER
4.19 4.15 4.18 V
0.00 0.00 0.00 V
MAIN 12.52V
H4.190V L4.150V