Publicité
2 Normal Operation
BNP1VO01 / 2023285
2.1
Mark VI Press Operation for Plant Personnel
The normal operating mode of this machine is fully automatic. After the machine is set for auto-
matic operation, a new load and corresponding batch codes pass from the loading device to the
press each time the loading device (usually a CBW
press is ready to receive. Before a new load is received, the cake of processed goods is discharged
to a storage belt or the receiving shuttle, freeing the machine for the next load.
2.1.1
Start Here for Safety
This document is meant to remind you, the machine operator, of what is required to run this ma-
chine safely and efficiently. Do not attempt to operate this machine before an experienced and
trained operator explains the procedure to you.
erty damage.
Read the machine manuals before you install, operate, service, or clean the
�
machine.
you. Electric power is present inside the cabinetry unless the main machine power
disconnect is off.
Do not unlock or open electric box doors.
�
Know the location of the main machine disconnect and use it in an emergency
�
to remove all electric power from the machine.
Do not service the machine unless qualified and authorized. You must clearly
�
understand the hazards and how to avoid them.
2.1.2
Check Switch Settings
Display or Action
Pellerin Milnor Corporation
WARNING: Careless use — can cause death or serious injury and prop-
DANGER: Contact with electric power — can kill or seriously injure
Explanation
Check that the run/program keyswitch is at
BNP1VO01
0000579910
A.6
BNP1VO01.C01 0000579909 A.2 B.2 A.6 7/10/23, 4:12 PM Released
®
tunnel washer) is ready to discharge and the
BNP1VO01.C02 0000579908 A.2 B.2 A.6 7/10/23, 4:12 PM Released
BNP1VO01.C03 0000579907 B.2 A.6 7/26/24, 11:45 AM Released
7/13/23, 9:44 AM
Released
13
Publicité
