Publicité
the telescopic shaft (9) to the correct
length and tighten the threaded bush.
To adjust the cutting angle:
Changing the cutting angle lets you trim
grass at places that a difficult to reach,
e.g. under benches or wall offsets.
Tread on the pedal (11) on the motor
ƒ
housing and tilt the telescopic shaft
(9). There are 7 preset tilt angles (see
"Work instructions").
Function as a lawn trimmer:
Cutting angle position 1 - 6
(rotary position 0°)
Function as a lawn edge trimmer:
Cutting angle position 7
(rotary position 90° or 180°)
To adjust the handle rod:
The handle rod (6) can be turned by 90°
and 180° (see "Work instructions").
Press the latch (7) to release the
„
lock and rotate the handle section
(6) until it latches into the
0°
180°
desired position.
Leave the handle (6) in the
0°-position when using the
device as a lawn trimmer in
the cutting angle positions
1-6. The protective cover
must not be pointing away
from the user. Risk of injury.
To adjust the spacer bow
(flower guard): The spacer bow keeps
the trimming assembly away from plants
and trunks not to be cut.
Fold down the distance bracket (15).
…
If the distance bracket is not required,
fold it up into the park position.
Extend the cutting line:
Your device is equipped with a dual line
auto-feed mechanism.
The line extends automatically every time
the device is switched on. For proper
functioning of the automatic line extension
mechanism, the spool must have stopped
completely before you restart the device.
If the lines are initially longer than the cut-
ting diameter, they are automatically short-
ened to the right length by the line cutter
(24).
Check the nylon line regularly for
damage and make sure the cutting
line still has the length specified by
the thread cutter.
• If no line ends are visible: Re-
place the spool (14) (see "Cleaning
and Maintenance").
• Setting the line length manually:
Remove the battery from the device!
Lightly pull on the thread ends and
press the locking button (23) repeat-
edly if necessary until the thread ends
protrude beyond the line cutter (24).
Manner of operation
WARNING. Danger of injury!
• Do not cut moist or wet grass.
• Before starting the unit, make
GB
IE
NI
15
Publicité
