Publicité
Enable cut:
Guide fence:
Laser:
Dust extraction:
Miter cut:
Tile cut:
Plastic cut:
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
saw blade continues to rotate!
After switching off the machine, remain
in a safe position (both hands on the
machine) and wait until the saw blade
has come to a standstill. Never stop the
rotation by hand!
• Let saw blade run to maximum speed
• Pressing the safety lock button (3) unlocks the
plunge cut mechanism at the same time, so
that the motor can be moved downwards
• L Release the lock screw for guide fence (11)
• Set the guide fence (B) in the guide fence slot
(10)
• Set a desired width and retighten the lock
screw for the guide fence (11)
• On/Off with switch (2)
• Line the laser up with cutting marks on your
workpiece
• Always use a dust extraction
• Plug the small end of the dust extraction hose
(C) with the dust collector plug (17)
• Connect the bigger end of C with a vacuum
device
• Use for miter cuts the miter base (H)
• Lift the lock lever to release the angle setting
clamp (c)
• Move to the desired angle
• Lock the angle setting (c)
• Tighten the workpiece with clamp (a)
• For cutting tiles always use diamond saw
blade (D)
• For cutting plastic and aluminium always use
HSS-saw blade (F)
OPERATION
25
TAS89M_230V
Publicité
