Publicité
• Do not place the saw on the workbench or floor without the guard completely covering the
saw blade.
• Remove nails and other foreign objects from the workpiece before machining
Instructions for using the LASER:
• Do not look directly into the laser beam with unprotected eyes.
• Never point the laser beam at reflective surfaces, people or animals. Even a low-power laser
beam can cause eye damage.
• Never open the laser module. Unexpected exposure to the beam may occur.
• The laser must not be replaced by another type of laser.
• Repairs to the laser may only be carried out by the laser manufacturer or an authorized
representative.
11.6
Hazard warnings
11.6.1
Residual risks
Despite intended use, certain risk factors cannot be completely eliminated:
• Risk of injury to hands/fingers from rotating tools during operation.
• Risk of injury from sharp edges of the workpiece, especially if the workpiece is not secured
with the appropriate tool/device.
• Risk of injury: Hair and loose clothing etc. can be caught and wound up by the rotating saw
blade! Always observe safety regulations regarding work clothing.
• Risk of injury due to contact with live components.
• Risk of injury due to breakage or tearing of the saw blade
• Risk of injury due to dust emissions from workpieces treated with harmful substances
• Risk of eye injury from flying parts, even when wearing safety goggles.
• Risk of injury to hearing during prolonged work without hearing protection
• Risk of injury from kickback.
• Contact with the saw blade in the uncovered saw area.
• Cutting injuries due to interference with the running saw blade
11.6.2
Hazardous situations
Due to the design and construction of the machine, hazardous situations may occur which are
identified in this manual as follows:
A safety instruction designed in this way indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
A safety instruction of this type indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
A safety instruction designed in this way indicates a possibly hazardous situation
which, if not avoided, may result in minor or moderate injury.
A safety notice designed in this way indicates a potentially hazardous situation which,
if not avoided, may result in property damage.
Regardless of all safety regulations, your common sense and your appropriate technical
aptitude/training are and remain the most important safety factor in the error-free operation of the
machine. Safe working depends on you!
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
D A N G E R
W A R N I N G
C A U T I O N
N O T E
SAFETY
23
TAS89M_230V
Publicité
