Publicité
enters slot in depth gauge tool.
2) With a medium flat file, file depth gauge level with depth gauge tool.
3) Remove depth gauge tool. With a flat file, round off front corner of cutter depth gauge.
Sprocket drive
• Regularly inspect the sprocket drive for wear or damage when replacing the chain. In case of
necessary, contact local dealer for sprocket drive replacement.
Sprocket cover
• Chips and saw dust will accumulate inside of the sprocket cover. Clean it with a stiff brush.
6.3- Storage
• Clean the product, remove the battery and empty the oil tank before storage.
• Charge the battery before storage. For prolonged storage, charge the battery every 3 months.
• Fit the scabbard so that it complelely covers the guide bar.
• Keep product, instruction manual and accessories (if any) in the original packaging.
• Store the product in a clean environment, where is not freezing or too hot (exceed +45 ̊ C ).
• Keep out of reach of children (e.g. lock it up).
6.4- Disposal
• Do not dispose with household garbage. Do not throw into the environment.
• Dispose of the product in a collecte centre for waste of electrical and electronic equipment, or a
waste drop-off centre; or seek advice from your local municipality.
• Proceed with disposal of the tool, accessories and packaging according to local regulations
regarding the protection of the environment.
Our warranty conditions are available from our STAV department [*] and on our website.
Should you have any repair requests under the warranty, please contact your retailer or our STAV [*]
who will inform you on the procedure.
Should you have any parts and/or accessories request, you can contact our STAV [*] to ask for the
product exploded view by indicating our reference and the serial number or batch number appearing
on the nameplate.
[*] STAV = Technical and After-Sales Service department
STAV contact details:
Tel : 08 92 35 05 77 (0,34€/min ; only in France) ; email :
Internet Website:
www.ribimex.com
Ribimex, 56 Route de Paris, F-77340 Pontault-Combault.
sav@ribimex.fr
Page 21 / 33
Publicité
