mundoclima Aerotherm BCC 200 CONNECT Manuel D'installation, D'utilisation Et D'entretien page 140

CONFIRM / UNLOCK
If the screen and buttons are unlocked, press this button to load the setting parameters after setting
a parameter:
⑦

If it is pressed within 10 sec, the setting parameters will be loaded into the unit;

If it is pressed after 10 sec, it resets all the parameters.
If the screen and buttons are locked, press and hold this button for 3 s to unlock them.
- / DOWN
Decreases the corresponding value.
⑧
Pressed for more than 1s: the value decreases continuously
ON/OFF button and LED indicator
Unità in standby: press
⑨
Unità on: press
Unit off: press
LED: on: unit on; off: unit off.
Anti-legionella
Press the confirmation button.
the DISINFECT icon and the first two values of 8888 flashthe
hour can be changed.
Press the confirmation button,
the last two values of 8888 flashthe
+
minutes can be changed.
After setting, press OK to save the settings and exit.
Choose 01
Press the Cancel button to exit the disinfection time setting.
If no disinfection start time has been set, disinfect once every 7 days using 23:00 as the
default setting.
If the disinfection start time has been set, disinfection will be carried out once every 7 days
according to the disinfection start time set.
Changing the unit of measurement °F / °C
Press the confirmation button.
+
the LCD displays F or C; press
Choose 02
Alarms reset
Press the confirmation button.
+
the alarm beeps briefly
Choose 03
the error code / protection is reset
10 CONTRO L
, the unit turns off.
, the unit turns off.
, the unit turns on.
to switch from °F to °C and vice versa