mundoclima Aerotherm BCC 200 CONNECT Manuel D'installation, D'utilisation Et D'entretien page 136

6 programs can be set
Corresponding icon on: program set.
Corresponding icon off: program not set.
④
When the program is set, the corresponding icon flashes at a frequency of 2Hz and the
set program will light up.
Reserved
⑤
Unit in disinfection cycle. (antilegionella)
⑥
Compressor in operation.
⑦
Buttons locked.
⑧
Unit connected to the solar signal or to the solar water pump.
⑨
Electric heater in operation
⑩
High temperature alarm
⑪
Water temperature above 50°C
Unit in error/protection.
⑫
Unit works in VACATION mode.
There are 14 default vacation days; they can be set in a range from 1 to 360.
Disinfect mode is automatically activated on the last day of the holiday.
⑬
At the end of the cycle, the temperature value set before vacation mode was activated is
restored.
Unit in HYBRID mode.
⑭
Unit in E-HEATER mode.
⑮
INVALID
An invalid button was pressed.
⑯
SET TEMP
On: water temperature setting.
⑰
SET TIME
On: time setting.
⑱
10 CONTRO L