mundoclima Aerotherm BCC 200 CONNECT Manuel D'installation, D'utilisation Et D'entretien page 127

All electrical operations should be performed by trained personnel
having the necessary requirements by the regulations in force and
being informed about the risks relevant to these activities.
MIin. Diameter of Power Supply Cord (mm
2
Earth Cord (mm )
Manual Switch (A) Capacity/Fuse (A)
Creepage Breaker
Please choose the power cord according to above table, and it should comply with local electric standard.
The power cord type, recommanded power cord mode is H05RN-F.
When wiring the power supply, please add additional insulation sheath at the place without rubber insulation
layer.
 The unit must be installed with an Creepage Breaker near the power supply and must be effectively
earthed.

A creepage breaker must be installed adjacent to the power supply
 Never use the wire and fuse with wrong rated current, otherwise unit may break down and cause fire
furthermore.
8 ELECTRICAL CONNECTIO NS
2
)
40/30
30 mA ≤ 0,1 sec
4
4
This unit is required reliable earthing
before usage, otherwise might cause
death or injury.