mundoclima Aerotherm BCC 200 CONNECT Manuel D'installation, D'utilisation Et D'entretien page 159
Masquer les pouces
Voir aussi pour Aerotherm BCC 200 CONNECT:
- Manuel d'installation (43 pages) ,
- Manuel de l'utilisateur (35 pages)
Publicité
Size
Ventilation
Type of fan
Air flow
Available pressure head
Integration
Solar coil surface
Solar coil material
Maximum operating pressure
1. Inlet water temperature 15 °C, accumulator set 45°C, air on source side 15°C D.B /12°C W.B.
2. The product complies with the European Directive ErP, which includes the Commission Delegated Regulation (EU) N. 812/2013 and the Commission Delegated Regulation N.
814/2013, Average Climate, Heat Pump Water Heater
3. The product complies with the European Directive ErP, which includes the Commission Delegated Regulation (EU) N. 812/2013 and the Commission Delegated Regulation N.
814/2013, Warmer Climate, Heat Pump Water Heater
4. The product complies with the European Directive ErP, which includes the Commission Delegated Regulation (EU) N. 812/2013 and the Commission Delegated Regulation N.
814/2013, Colder Climate, Heat Pump Water Heater
5. Data referred to completely ducted unit.
6. Maximum temperature that can be reached during Anti-legionella mode(Dinsifect)
*It contains fluorinated greenhouse gases
Electrical data
Size
Power supply
F.L.A. - Current absorbed at the maximum allowed conditions
F.L.I. - Power absorbed at full load (at the maximum allowed condi-
tions)
M.I.C - Maximum inrush current
1) Power supply 220-240/1/50 Hz
For power voltages other than the standard, contact the technical department
The units are conforming with the prescriptions of European Standards CEI EN 60204 and CEI EN 60335
Warning: when defining the correct size, verify that all absorption is compliant with current electrical supply
contracts in force in the country of installation
Operating limits
200 - 200S
1. Use range of the heat pump
2. Use range of the electrical heating element
3. Use range of the electrical heating element only in Anti-Legionella mode
(Disinfect)
13 TECHNICAL DATA
3
m
/h
Pa
2
m
bar
MPa
200
(1)
220-240/1/50
V
A
9,10
kW
2,10
A
22,2
70
60
50
40
30
20
10
0
-25
Twu [°C] water temperature in the accumulator
Tae [°C] air temperature at exchanger inlet
200
300
Centrifugal
270
414
25
45
-
-
-
-
-
-
-
-
300
200S
220-240/1/50
220-240/1/50
9,80
9,10
2,25
2,10
33,7
22,2
300 - 300S
3
2
-20
-15
-10
-5
0
5
10
15
Tae [°C]
200S
300S
270
414
25
45
1,10
1,30
Enamel Steel
10
10
1
1
300S
220-240/1/50
9,80
2,25
33,7
2
1
20
25
30
35
40
45
Publicité
