mundoclima Aerotherm BCC 200 CONNECT Manuel D'installation, D'utilisation Et D'entretien page 117

Condensate drain
The condensate must be disposed in order to avoid damages to
people and things.
To smoothly drain condensate, the unit should be installed at a
horizontal floor. Otherwise, the drain vent is ensured at the lowest
place.

Condensate drain lines installed and piped to an adequate
drain accumulation /drain pit.

Arrange the drain pipe to ensure smooth draining.
 Improper drainage work may cause wetting of the building,
furniture etc..
 IMPORTANT: Water coming from the plastic shroud is an
indicator that both condensation drain lines (1,2) may be
blocked

Immediate action is required.
 A discharge pipe connected to the pressure-relief (3) device is
to be installed in a continuously downward direction and in a
frost-free environment
 Condensate can escape from unit if drainage pipe is blocked.
 If the drainage pipe
condensate collection tray.
6 WATER CONNECTIONS
N ote
N ote
is blocked, consider
Block the condensate drain pipe with
installing a
the clip supplied.
Clip