Publicité
Squeeze the trigger
piece. Make sure to keep the product pressed against
the work piece.
Set the On/Off switch
the product off.
Note: Hold tool firmly and press on work surface before
firing to ensure the complete penetration of the staple/
nail.
Battery level indicator
pressing down trigger
to "I" position.
Note: Battery level indicator
about 5 seconds after releasing trigger
Battery status LED when use
red
Light up
Light up
Light up
Clearing Jammed Staples
WARNING!
trigger
. It may otherwise accidentally be triggered after
1
removing the staple.
Note: Set the On/Off switch
clearing the jammed staple.
Open the magazine
Remove the jammed staple from the magazine
to drive a staple/nail into the work
1
to the "0" position to switch
8
shows the battery level when
9
while On/Off switch
1
yellow
Light up
Light up
Off
If a staple is jammed, do not squeeze the
8
and pull back on the pusher
4
keeps glowing up for
9
1
Battery level
green
Light up
Off
Off
to "0" position prior to
is set
8
.
> 70 %
30–70 %
< 30 %
.
3
.
4
GB/IE
51
Publicité
