Publicité
Note: Do not trigger the staple gun when empty to
prevent wear.
Determining the Staple Length
Consider two factors when determining the correct staple
length:
- the thickness of the material being fastened
- the composition (hardness) of the material being
fastened.
4–6 mm staple or 6–8 m m nail in length will typically suffice
when driving into plywood and fiber board.
8–12 mm staple or 10 m m nail in length will typically suffice
when fastening into softwood such as pinewood.
The crown of the staple or head of the nail should be flushed
with the top of the material being fastened as shown.
If the crown of the staple/head of the nail is not flush with
the material to be fastened, the staple/nail is too long. In
52 GB/IE
Publicité
