Publicité
ASSEMBLY STEP 3
4
6
2
16
NOTE: Be
careful not
to pinch any
wires while
attaching the
console mast.
5
7
G
H
I
8
HARDWARE FOR STEP 3
PART
TYPE
G
WAVY WASHER
H
FLAT WASHER
I
FLAT WASHER
B
SPRING WASHER
J
BUTTON HEAD BOLT
A
Open HARDWARE FOR STEP 3.
B
Remove PRE-INSTALLED BOLTS AND WASHERS (6)
from MAIN FRAME (2).
C
Carefully pull the CONSOLE CABLE (4) through the
B
CONSOLE MAST (5) using the twist tie located inside
the CONSOLE MAST (5).
D
Attach CONSOLE MAST (5) to MAIN FRAME (2) using
PRE-INSTALLED BOLTS AND WASHERS (6).
E
Slide WAVY WASHER (G) and FLAT WASHER (H) over
CRANK (7) followed by PEDAL ARM (8) as shown. Rest
J
pedal arm wheel on guide rail.
F
Attach the PEDAL ARM (8) to the CRANK (7) using
1 FLAT WASHER (I), 1 SPRING WASHER (B) and 1
BOLT (J).
G
Repeat steps E–F on the opposite side of the elliptical.
DESCRIPTION
QTY
17.2X22.5X0.5T
2
16.0X25.0X1.0T
2
8.2X30.0X1.5T
2
8.2X15.4X2.0T
2
M8X1.25PX15L
2
Publicité
