Publicité
[
Stop immediately if you feel any discomfort.
10. Experiment by moving the device slowly across the area
you are treating. If the treated area is hot and you feel
EN
EN
uncomfortable, try moving the device a little faster.
11. Clean the treated area: Remove any residual gel from
the skin, then rinse the skin with lukewarm water. Dry the
skin with a towel, and apply a facial cream to sooth and
moisturize the skin.
7. Cleaning, maintenance & storage
Clean the device after each treatment.
[
Never immerse your device or any of its parts in
water!
U
Put the device in standby mode, then unplug it.
U
Use absorbent paper (such as toilet paper or wipes) to
remove the gel residue off the treatment surface (#1). Make
sure you remove all gel residue to prevent the gel from
solidifying or damaging the device.
U
Use a clean damp cloth to clean the device and the
treatment surface (#1).
Z
You may use cleaning fluids with up to 70%
alcohol, but never use acetone or other abrasive
liquids, because they will damage your device.
U
Finally, wipe the device and the treatment
surface (#1) dry with a clean dry cloth.
U
After cleaning, we recommend you store the
device in its original box. Store the device
and the gel in a cool dry place.
14
Publicité
