Publicité
Z
Slider Gel (or any other water-based clear gel) facilitates
smooth movement of the treatment surface over the skin
and enables conductivity. To ensure safe and efficient
treatment, always start by applying Slider Gel and apply
more gel if needed.
6.
Using energy level 1, place the device on the
area you want to treat. Make sure that it is in
full contact with the skin. You will feel a mild
sensation of warmth.
7.
Move the device in gentle massage-like motions on the
area you wish to treat. Progress slowly and carefully. Keep
moving the device ensuring that the 3 electrodes stay in
contact with the skin as you treat the area.
With the device constantly in motion, treat each area for
8.
15 minutes.
9.
Increase the energy level gradually. Using the highest
energy level will get the best results, but it's important that
you set the energy level that is comfortable for the area you
are treating.
o
34
- 43
1-2
Z
You will feel the skin temperature rise as you increase the
energy level. It usually takes about 1-2 minutes for the
device to reach the required temperature. During the
treatment your skin will get a little red. Don't worry; this
is normal.
o
13
43
o
13-14
EN
EN
2
3
1
4
Publicité
