Publicité
22 Combinations of Cutting Attachments, Deflectors and Carrying Syst...
21.4
Recommended temperature
ranges
For optimum performance of the brushcutter and
battery, note the following temperature ranges:
– Charging: 5°C to 40°C
– Use: - 10 °C to + 40 °C
– Storage: - 20 °C to + 50 °C
If the battery is charged, used or stored outside
the recommended temperature ranges, perform‐
ance may be restricted.
If the battery is wet or moist, allow the battery to
dry for at least 48 h between 15°C and 50°C and
with less than 70% humidity. Higher humidity
may extend the drying time.
21.5
Sound and vibration values
The K value for the sound pressure level is
2 dB(A). The K value for the sound power level is
2 dB(A). The K-value for vibration level is 2 m/s².
STIHL recommends wearing hearing protection.
Using with a mowing head except PolyCut 28-2
– Sound pressure level L
ance with IEC 62841-4-4: 80 dB(A)
– Sound power level L
ance with IEC 62841-4-4: 92 dB(A)
– Vibration value a
hv
with IEC 62841-4-4
– Control handle: 2.0 m/s²
– Left handle: 2.9 m/s²
Use with a PolyCut 28-2 mowing head
– Sound pressure level L
ance with IEC 62841-4-4: 84 dB(A)
– Sound power level L
ance with IEC 62841-4-4: 97 dB(A)
22 Combinations of Cutting Attachments, Deflectors and Carrying
Systems
22.1
Combinations of cutting attachments, deflectors and carrying systems
Cutting attachment
– PolyCut 18-2 (335 mm diame‐
ter) mowing head
– PolyCut 28-2 (365 mm diame‐
ter) mowing head
Mowing head with 2.4 mm diame‐
ter "round, quiet" mowing line:
– AutoCut C 26-2 mowing head
– AutoCut 27-2 mowing head
– DuroCut 20-2 mowing head
– SuperCut 20-2 mowing head
– FixCut 31-2 mowing head
0458-602-9602-A
measured in accord‐
pA
measured in accord‐
wA
measured in accordance
measured in accord‐
pA
measured in accord‐
wA
Deflector
– Deflector for mowing
heads (420 mm dia‐
meter)
– Universal deflector
with skirt and line
limiting blade
(420 mm diameter)
– Vibration value a
hv
with IEC 62841-4-4
– Control handle: 2.0 m/s²
– Left handle: 2.9 m/s²
Use with a metal cutting attachment
– Sound pressure level L
ance with IEC 62841-4-4: 81 dB(A)
– Sound power level L
ance with IEC 62841-4-4: 94 dB(A)
– Vibration value a
hv
with IEC 62841-4-4
– Control handle: 1.8 m/s²
– Left handle: 2.1 m/s²
The vibration levels indicated were measured
according to a standardized test method and can
be used as a basis for comparing electric power
tools. The vibration levels actually occurring may
vary from the values indicated, depending on the
type of application. The vibration levels indicated
can be used for an initial estimate of the vibration
load. The actual vibration load has to be estima‐
ted. The times can be taken into account in the
estimate when the electric power tool is switched
off and also when it is switched on but running
without any load.
For information on compliance with the Physical
Agents (Vibration) Directive 2002/44/EC, see
www.stihl.com/vib.
21.6
REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation see www.stihl.com/reach.
Carrying system
– Shoulder strap
– Full harness with quick-release system
– STIHL AR battery with the support cus‐
hion
– Battery belt with attached "AP belt bag
with connecting cable" together with the
shoulder strap
– Battery belt with strap and attached "AP
belt bag with connecting cable" together
with the support cushion
– Carrying system with built-in "AP belt
bag with connecting cable" together with
the support cushion
English
measured in accordance
measured in accord‐
pA
measured in accord‐
wA
measured in accordance
51
Publicité
