English
3
Overview
3.1
Brushcutter and battery
1
2
3
6
5
#
4
10
8
9
7
20
19
1 Locking lever
The locking lever holds the battery in the bat‐
tery compartment.
2 Battery compartment
The battery compartment holds the battery.
2
3 Cover
The cover is the placeholder for a Smart Con‐
nector 2 A.
4 Air filter
The air filter filters the air entering the engine.
5 Carrying strip
Perforated strip for suspending the carrying
system.
6 Control handle
The control handle is used for operating,
holding and guiding the brushcutter.
7 trigger
Switches the brushcutter on and off.
2
The cover is part of the motor housing. Only remove the cover to install a Smart Connector 2 A and
store it safely for later re-installation. Always use the brushcutter with the cover or Smart Connector 2
A installed.
32
13
12
11
14
15
16
17
18
22
21
#
8 Trigger lockout
The trigger lockout unlocks the trigger.
9 Unlock button
The unlock button switches on the brushcut‐
ter and selects the power level.
10 LEDs
The LEDs indicate the selected power level.
11 Wing screw
The wing screw secures the handlebar to the
handle support.
12 Handlebar
The handlebar connects the control handle
and the handle to the shaft.
13 Handle
The handle is for holding and guiding the
brushcutter.
14 Shaft
The shaft connects all components.
15 Opening for the stop pin
The opening for the stop pin accommodates
the stop pin.
16 Stop pin
The stop pin blocks the shaft when a cutting
attachment is being attached.
17 Gear housing
The gear housing encloses the gearbox.
18 Screw plug
The screw plug closes the filler opening for
STIHL gear grease.
19 Battery
The battery supplies power to the brushcutter.
20 LEDs
The LEDs indicate the state of charge of the
battery and any faults.
21 Button
The pushbutton activates the LEDs on the
battery. The pushbutton activates and deacti‐
vates the Bluetooth® interface (if available).
22 "BLUETOOTH
®
" LED (only for batteries with
)
The LED indicates the activation and deacti‐
vation of the Bluetooth® interface.
# Rating plate with machine number
3 Overview
0458-602-9602-A