Publicité
English
2
► Press and hold the trigger lockout (1).
► Press the unlock button (2).
The LEDs light up to indicate the selected
power level.
► Press and hold the unlock button (2).
This selects the next power level. After the
third performance level, it starts again with the
first performance level.
► Push the unlock button (2) as many times as
necessary to set the desired power level.
► If you are using a circular saw blade: Select
power level 3.
13.3
Mowing
The cutting height is determined by the distance
of the cutting attachment from the ground.
Mowing with a mowing head (A)
► Swing the brushcutter steadily back and forth
in an arc.
► Walk forward slowly and steadily.
Mowing with a grass cutting blade or brush
knife (B)
► Mow with the left part of the metal cutting
attachment.
► Walk forward slowly and steadily.
For optimum performance, note the recommen‐
ded temperature ranges,
46
1
A
21.4.
13.4
Saws with a circular saw blade
► Support the left side of the deflector against
the stem.
► Cut through the stem at full speed.
► A safety distance of at least 2 tree lengths to
the next work area.
13.5
Adjusting Nylon Line
13.5.1
Line Feed on AutoCut Mowing Heads
► Briefly tap the rotating mowing head on the
ground.
About 30 mm of fresh nylon line is advanced.
The line limiting blade in the deflector auto‐
matically cuts the mowing lines to the correct
length.
B
2
Automatic feed will not take place if the mowing
lines are shorter than 25 mm.
► Switch off the brushcutter and remove the bat‐
tery.
► Depress the spool (1) on the mowing head
and hold it depressed.
► Pull out the mowing lines (2) by hand.
► If the mowing lines (2) cannot be pulled out to
the required length: Replace the spool (1) or
the mowing lines (2).
The spool is empty.
13.5.2
Line Feed on SuperCut Mowing
Heads
Mowing lines are advanced automatically. The
line limiting blade in the deflector automatically
cuts the mowing lines to the correct length.
Automatic feed will not take place if the mowing
lines are shorter than 40 mm.
13 Operating the Trimmer
1
0458-602-9602-A
Publicité
