Publicité
English
1
2
► Hook the perforated strip (2) into the carabi‐
ner (1).
► Let go of the brushcutter and check to see
how it is balanced - the cutting attachment
should just rest on the ground.
► If the brushcutter cannot be balanced: Hook
the carabiner (1) into another hole on the per‐
forated strip (2) and check the balance again.
10 Removing and Fitting the
Battery
10.1
Inserting the Battery
► Insert the battery (1) up to the limit stop into
the battery compartment (2).
The battery (1) engages with a click and is
now locked.
44
1
2
10 Removing and Fitting the Battery
10.2
Removing the battery
► Press both locking levers (1).
The battery (2) is now unlocked and can be
removed.
11 Switching the Trimmer
On/Off
11.1
Switching on the brushcutter
2
3
► Hold the brushcutter firmly with your right hand
on the control handle so that your thumb
wraps around the grip (4) of the control han‐
dle.
► Hold the brushcutter with your left hand on the
handle so that your thumb wraps around the
handle.
► Depress the trigger lockout (1) with your hand
and keep it pressed.
► Press the unlock button (2).
The LEDs emit light to indicate the power level
used last.
► Squeeze and hold the trigger (3) with your
index finger.
The brushcutter accelerates and the cutting
attachment rotates.
The more the trigger (3) is depressed, the faster
the rotation of the cutting attachment.
The brushcutter can also be switched on by first
pressing the release button (2) and pressing the
trigger lockout (1) within 5 seconds (as long as
the LEDs are flashing). The trigger (3) is now
unlocked and the brushcutter is ready for use.
2
1
1
4
0458-602-9602-A
Publicité
