Carel ultimateSAM SAB Mode D'emploi page 26

ENG
SA0 installation procedure - manifold outside of AHU - with AHU wall cover kit
Description of the installation procedure for ultimateSAM version SA0* (single-pipe), with manifold outside of the air handling unit and installation of the wall
cover kit inside the AHU.
1
125 mm
(4.92")
Ø 100 mm
(3.94")
2
222 mm
(8.74")
3
4
5
6
7
"ultimateSAM - user" +03U0070EF - rel. 1.0 - 23.05.2013
Assemble the SA0 steam distributor
Ø 7 mm
(0.28")
125 mm
(4.92")
Apply drilling template to the duct where the steam distributor will be installed
(optional)
Venduto separatamente/sold separately
Ø 12 mm
(0.47")
Drill the necessary holes
Insert the gasket and rest it against the support fl ange; insert the fastening bolts to secure the
support fl ange
View of the bolts inserted in the support fl ange
26