Publicité
CHARGE DEEBOT
1
Press and hold
for 3 s, wait for the startup music to play, indicating that
the robot has powered on�
3 s
2
Tap
to recall the robot to enter the Station to charge�
6.5 h
Short press
• Once the Station is placed properly and plugged in, the robot will automatically
return to it to recharge and empty the Dust Bin as needed during operation� To
ensure this process runs smoothly, it is recommended that the robot starts from
the Station and that the Station is not moved while cleaning�
EN
16
OPERATE DEEBOT
When creating a map for the first time, please follow the robot to help resolve
some minor issues�
For instance, if the robot gets stuck under low furniture, you can refer to the
following solutions:
1� Raise the furniture if feasible�
2� Cover the bottom of the furniture to prevent the robot from entering�
3� Set up virtual boundaries in the App to prevent the robot from entering�
1
Start Cleaning
Before cleaning for the first time, please make sure the robot is in the
Station and fully charged� Tap
start cleaning and mapping simultaneously�
2
Pause
When the robot is working, tap
3
Wake up
After pausing for a while, all indicator lights on the robot will go out� To
wake the robot up, tap
on it�
Short press
Note:
1� Do not frequently remove the washable mopping pads�
2� Do not use a rag or any other object to scratch the Moping Pad Plates�
3� When the ECOVACS HOME App prompts that the mopping pads need to be
replaced, please replace them in time� Explore more accessories
in the ECOVACS HOME App or at
on the robot, and then the robot will
on it to pause its activity�
https://www�ecovacs�com/global�
Publicité
