Publicité
4.2 Please do not lubricate excessively,
service life of the treadmill.
Mulfunction and treatment
Error code
E01
E02
E03
E04
E06
To order spare parts
To guarantee an efficient service, make sure you have the following items before you contact our After Sales Service:
The name or reference of the product.
The manufacturing number shown on the main chassis and on the packing box.
The number of the missing or faulty part shown on the exploded view of the product described in this manual.
lubricant is not the more the better, reasonable lubrication can improve the
Description
Communication
1. Power off for 30 seconds, then power on,if the error still continue,
failure
perform the following checks in sequence
2.
remove and reinsert
3.
4. Replace the converter
Output overcurrent 1. Power off for 30 seconds, then power on,if the error still continue,
perform the following checks in sequence
2.
Check whether it violates routine use
3.
Check whether the weight exceeds the limit of treadmill
4.
Check whether the running belt or running board is badly worn or
needs lubricating oil maintenance
5.
Check whether the running belt is deviated or too tight
6.
Check whether the roller is stuck
7. Replace the converter
Converter
1. Power off for 30 seconds, then power on,if the error still continue,
overvoltage
perform the following checks in sequence
2.
Check whether it violates routine use
3. Replace the converter
Converter overload 1. Power off for 30 seconds, then power on,if the error still continue,
perform the following checks in sequence
2.
Check whether the running belt or running board needs lubricating
oil maintenance
3.
Check whether the running belt is deviated or too tight
4.
Check whether the weight exceeds the limit of treadmill
5.
Check whether it violates routine use
6.
Check whether the roller is stuck
Motor
1. Power off for 30 seconds, then power on,if the error still continue,
disconnection LF
perform the following checks in sequence
2.
Check whether the three wires from the treadmill drive motor to the
converter are loose. remove it and reinsert it, pay attention to the order
of the lines
3. Replace the converter
After Sales Service
Email: service-uk@carefitness.com
Treatment countermeasures
Check whether the wire between console and converter is loose,
Replace the console or communication interface
Publicité
