Publicité
Adult body mass index reference table
5.Hand pulse test
The test can detect static and dynamic heart rate before and after exercise, and recovery after exercise. The user
holds the metal plate of heart rate detection on the left and right horizon handlebar with both hands, then the heart
rate value will be displayed on the screen. (Warm reminder: the maximum heart rate of the exerciser should not
exceed (220- age). When the heart rate exceeds the maximum, it is recommended to rest for about 30 minutes or
slow down and reduce the incline. The detected heart rate is only for the reference of sports and fitness.
6.Music play
Turn on Bluetooth in the phone Settings, then find treadmill Bluetooth (according to the name of the model) and
connect.
Application connection
Copy the link here under to your brower (Edge, Firefox, Chrome, Safari etc)
https://cloud.carefitness.com/index.php/s/E2WD22KMNBQzERL
And Follorw the detailed instruction
Maintennance and malfunction treatment
1．Clean: The surface of the treadmill should be kept clean, pull
out the power cord before cleaning. You can clean the running
belt and the surface of the treadmill with a soft and wet cloth, be
sure not to use strong solvents.
2．Adjustment of belt deviation: The running belt has been
adjusted when manufactured; it may runs defectively after
transportation and use. Turn off the treadmill before adjusting,
(see figure)adjust theleft and right bolts in rear roller with
wrenchIf the belt deviates to the left, clockwise rotate the left
bolt. If the belt deviates to the right, counterclockwise rotate the
right bolt. It is better to adjust 1/2 circle at a time. After
adjustment, turn on the power and start the treadmill to check if
the belt back to certer at speed of 4-5km/h, repeat the
procedure if not.
3．Adjustment of belt slip: After a certain time of using, the belt might turn to be longer or couldn't free
Your should adjustthe left and right bolts in rear roller clockwise at same position till it runs smoothly and freely, it is
better to adjust 1/2 circle at a time .But to avoid shortening belt using lifetime, do not adjust it too tight.
4．Lubricate
When the lubricant between the running board and the running belt is used up, please lubricate the running board
and adjust the running belt well.
4.1Power off, loose the belt by using the method of belt deviation adjustment, then brush lubricant to the running
board evenly.
roll..
Publicité
