Publicité
1. Press
, enter into the program selection, press ENTER, then you can select different level of P5-
1----P5-6, the initial time setting is 30 min., only time can be set, the time range is 5:00-99:00, press SPEED+/- to
adjust the intitial value, then press START, the treadmill starts running, and the speed slowly increases to the
value that indicated in the first section of automatic program.
2. Press SPEED UP/DOWN to adjust the speed.
3. Press INCLINE UP/DOWN to adjust the incline.
4.
Press the speed shortcut key to quickly set the speed indicated by the key.
5.
Press the incline shortcut key to quickly set the incline indicated by the key.
6. Each program is divided into 24 segments.
7.
It chirps when switches between segments.
8.
When the set time run to zero,
9.
This program shows changes in the incline graph.
P6 Fatburn program
1. Press
, enter into the program selection, press ENTER, then you can select different level of P6-
1----P6-6, the initial time setting is 30 min., only time can be set, the time range is 5:00-99:00, press SPEED+/- to
adjust the intitial value, then press START, the treadmill starts running, and the speed slowly increases to the
the treadmill slows down until
stop, then return to standby.
Publicité
