Publicité
User Interface
(Fig. 1, Fig. 2, Fig. 11)
The User Interface 9 provides the following
functions:
• Status Indicator 20
• Mode Button 21
• Single Actuation Indicator 22
• Bump Actuation Indicator 23
• Battery Low Indicator 24
• Regular Service Due Indicator 25
• Major Service Due Indicator 26
• Reset Button 27
Fig. 11
22
23
20
21
Status Indicator
The Status Indicator 20 shows the status of
the stapler. A green light indicates that the
stapler is ready for operation. In case the
Status Indicator 20 light color is not green,
consult the "Troubleshooting" on page 22.
for further information.
Mode Button
Use the Mode Button 21 to toggle between
single actuation or bump actuation discharge
modes. The selection will be indicated by
either the Single Actuation Indicator 22 or
Bump Actuation Indicator 23.
Battery Low Indicator
The Battery Low Indicator 24 will only illu-
minate once the battery has reached 20%
charge or below. A yellow Battery Low Indi-
cator 24 signifies that the battery is 1-20%
Operation
24
25
26
27
full. A red Battery Low Indicator 24 signifies
that the battery is 0-1% full.
Regular and Major Service
Indicators
The Regular Service Due Indicator 25 or the
Major Service Due Indicator 26 will illumi-
nate once the stapler has reached a certain
amount of discharges. It is recommended to
return the stapler, battery pack and charger
to a BOSCH service facility for inspection
and/or service.
Reset Button
The Reset Button 27 is used to reset the
stapler to a normal state after an abnormal
condition is corrected. To reset the stapler,
press and hold the Reset Button 27 for 3
seconds.
Consult the "Troubleshooting" on page
22. for further information on resetting
the stapler.
17
Publicité
