Publicité
No-Mar Pad
Replacing the No-Mar Pad
(Fig. 2, Fig. 4)
The stapler is equipped with a pre installed
No-Mar Pad 1 which may be replaced once
worn.
To replace the No-Mar Pad 1:
1. Remove the Battery Pack 8.
2. Position stapler onto a flat stable sur-
face and pointed away from yourself and
bystanders.
3. Pull the No-Mar Pad 1 off the end of the
Workpiece Contact 2.
4. Install the new No-Mar Pad 1 onto the
end of the Workpiece Contact 2.
Fig. 4
Assembly
2
1
No-Mar Pad Storage
(Fig. 5)
A spare No-Mar Pad 1 can be stored on the
tool for easy accessibly. Insert the No-Mar
Pad 1 onto the No-Mar Pad Storage 18 loca-
tion, found at the end of the Magazine Slider
14.
Fig. 5
18
14
1 1
13
Publicité
