Publicité
Unloading the Magazine
(Fig. 2, Fig. 6, Fig. 8, Fig. 9)
1. Remove the Battery Pack 8.
2. Position stapler onto a flat stable sur-
face and pointed away from yourself and
bystanders.
3. Press the Magazine Release Button 13
and pull the Magazine Slider 14 to
the end of the Magazine 12
4. Tilt the stapler forward to remove the
Fastener Strip(s) 19 from the Magazine
12
.
5. Slowly push the Magazine Slider 14
into the Magazine 12 until it clicks in
place
.
es its full forward position. Free recoil of
the Magazine Slider can result in damage to
the follower, magazine, or cause personal
injury.
Fig. 9
19
14
16
.
Guide the Magazine Slid-
er by hand until it reach-
12
13
Operation
Dry Fire Lock Out
The stapler is equipped with a Dry Fire Lock
Out. The Dry Fire Lock Out prevents firing
when there are 5 fasteners remaining in the
magazine.
On/Off Button
(Fig. 1, Fig. 10)
To switch on the stapler, press the On/Off
Button 6, and the User Interface 9 will turn
on.
To turn off the stapler, press the On/Off But-
ton 6.
Fig. 10
6
Publicité
