Publicité
à
The display shows the measured value.
à
The display shows "OL" if the measured value exceeds the max. permiss-
ible value.
8. Remove the test probes from the measured object.
9. Switch the multimeter off by rotating the dial to the position OFF.
9.8 Measuring temperature
1. Switch the multimeter off by rotating the dial to the position OFF.
2. Insert the temperature measuring adapter into the measuring sockets. Insert
the black pole of the adaptor into the measuring socket COM on the multimeter.
3. Connect the temperature probe to the temperature measuring adapter. You can
only insert the temperature probe in one direction.
4. Rotate the dial to Temp.
5. (Optional) Change the temperature unit by pressing the button MODE.
6. With the tip of the temperature probe, touch the object of which you want to
measure the temperature.
à
The display shows the stabilized measured temperature after about 30
seconds.
7. Switch the multimeter off by rotating the dial to the position OFF.
50
Publicité
