Publicité
All manuals and user guides at all-guides.com
Endosee
System - User Manual
®
6.4 Power Button Function
The function of the Display Module Power Button is
described below.
!
WARNING:
condition before powering-on the fully assembled
unit. Do not use the system if visual signs of
external damage are observed.
Figure 8: Power Button
Touch Function
Power On
Power Off
6.5 Video and Picture (Single Frame) Button
The Video/Single Frame Buttons, located on both sides
of the cannula, allow user to capture/save still images
and video images. The image capture operations are
described below.
Figure 9: Pictures (Single Frame) or Video Button
Video/Single frame Touch Function
Capture Still Image
Capture Video Clip
Capture Still Image while
Video is Recording
Stop Video Capture
Inspect the integrity of the unit and
Action
Press-and-Release; Endosee splash
screen will appear
Press-and-Hold until audible beeps
occur (approximately 1 second);
Endosee splash screen will appear
Action
Press-and-Release
Press-and-Hold:
1 second
Press-and-Release
while video is recording
While system is capturing
video, press button one
more time
23
Publicité
