Publicité
Once the procedure is complete, the system implements the change to the individual
chainring position adjusted.
NOTE
The procedure for adjusting the EPS front derailleur, when used in conjunction with EPS
Bar End controls and EPS Bar End brake levers, is included in the respective instruction
sheets.
IMPORTANT!
If you do not press the MODE key briefly, which allows to complete the setting
procedure, the system will automatically exit the procedure after 90 seconds and
will save the new setting.
Every time a resetting to zero is conducted, previous adjustments are reset.
WARNING!
Setting the front derailleur when the bicycle is in motion may result in dangerous
situations and cause accidents. Therefore please be very careful if you decide to
do it.
WARNING!
Keep your fingers clear while moving the front derailleur and the rear derailleur.
ENGLISH
25
Publicité
