Publicité
When installing/removing or servicing
components, switch off the EPS drive-
train as indicated in the instruction sheet
of the EPS Power Unit.
Loosen the screw using a 5 mm Allen
wrench (A - Fig. 1) and remove the screw
together with the washers, then secure
the derailleur on the frame's braze-on
coupling.
• Adjust the height of the derailleur so
that the cage is at a distance of 1,5÷3 mm
from the larger chainring (Fig. 2).
• Align the derailleur: the inner side of
the derailleur cage must be parallel with
the chainring (Fig. 3).
• Using a torque wrench, fasten the
tightening bolt (A - Fig. 1) to the frame,
torquing to the following values:
- 7 Nm (62 in.lbs) for braze-on versions
ENGLISH
2 - ASSEMBLY
1
2
7 Nm - 62in.lbs
A
21
Publicité
