3 Installation requirements and
Installation requirements and clearances
clearances
Installation requirements and clearances
3.1 Appliance dimensions
IMPORTANT: The hood needs to be centered over the
cooking surface for best performance.
3.2 Safety clearances
Comply with the safety clearances for the appliance.
WARNING
Grease deposits in the grease filter may catch fire. The
specified safety distances must be observed in order to
prevent an accumulation of heat.
The distance between hood and cooking surface must
▶
be a minimum of 24" above electric cooktops, and a
minimum of 30" above gas cooktops.
Observe the specifications for your cooking appliance. If
▶
gas and electric cooktops are operated together, the
largest specified distance applies.
Installation requirements and clearances en-us
3.3 Appliance weight
Make sure the cabinet supports the weight of the
appliance.
Model
DUH50353UC
DUH56353UC
3.4 Electrical requirements
WARNING
This appliance must be properly grounded.
¡ The appliance requires a 120V AC, 60Hz. 15A branch
circuit.
¡ The appliance should only be connected to a dedicated
circuit (with ground) that has been installed according to
relevant regulations.
¡ Check your local building codes for proper method of
installation. This appliance should be installed in
accordance with applicable local codes or, in the
absence of local codes, with the National Electrical
Code, NFPA 70 or the Canadian Electric Code, CSA
C22.1-02.
¡ Electrical data:
Weight
23 lbs (10.4 kg)
26 lbs (11.8 kg)
7