Publicité
For framed cabinets: Secure the hood to the mounting
6.
brackets using the four (4) no. 8-18 x ½" metal screws
from the parts bag. Insert two (2) screws per side in the
slots.
5.3 Option 2: Installing the hood - standard installation
Preparing the hood location
Use the proper diagram for placement of ductwork and
1.
electrical cutout in the cabinet or wall. For a non-ducted
installation, DO NOT cut a duct access hole, only cut
the hole for electrical wiring.
→ "Installation dimensions", Page 15
Installation dimensions
Refer to the measurements given below for your installation situation.
7" Round vertical ducting
℄
Center line
A
Hood mounting screws (4)
B
¡ 30" hoods: 12⅞" (327 mm)
¡ 36" hoods: 15⅞" (404 mm)
For frameless cabinets: Secure the hood to the
7.
cabinet using the four (4) no. 8 x ⅝" round head wood
screws from the parts bag. Insert two (2) screws per
side in the slots.
Attach the power cable to the hood using the strain
8.
relief.
Install part-way four (4) round head no. 8 x ⅝" mounting
2.
screws into shims or cabinet, according to the proper
diagram.
The mounting screws are included in the parts bag, but
wood shims and shim mounting screws are not
included.
3¼" x 10" Horizontal ducting
Center line
Hood mounting screws (4)
¡ 30" hoods: 12⅞" (327 mm)
¡ 36" hoods: 15⅞" (404 mm)
Installation instructions en-us
15
Publicité
