Publicité
Remove the mounting bracket. Using a ⁷⁄₆₄" drill bit, drill
3.
3 holes where marked.
Fasten the mounting bracket to the side frame using a
4.
flathead screwdriver and 3 of the provided no. 8 x ⅝"
wood screws. Repeat for the other side frame.
Installing the mounting brackets for frameless
cabinets
Refer to the marking on the mounting brackets to
1.
determine the correct installation side and orientation.
Align the corresponding mounting bracket to the cabinet
2.
side frame. Place the rear end of the mounting bracket
against the wall. Draw a line on the outer edge of the
mounting bracket.
Slide the mounting bracket towards the center of the
3.
cabinet and align the outside edge of the mounting
bracket with the marked line, keeping the rear end edge
leaning on the wall.
Use a pencil to mark 3 holes.
4.
Installation instructions en-us
13
Publicité
