Technical Specifications; Machine Components - Tennant S9 Manuel De Fonctionnement

- Keep hands away from spinning brush.
- Use caution when lifting full hopper to avoid
back strain.
- Wear heavy gloves when removing sharp
objects from hopper.
- Turn machine power off if brush becomes
obstructed or machine malfunctions.
4. Before leaving or servicing machine:
- Stop on level surface.
- Turn machine power off and remove key.
5. When servicing machine:
- Turn machine power off and remove key.
- Disconnect battery cable and charger cord
before working on machine.
- Wear protective gloves and glasses when
handling batteries or battery cables.
- Avoid contact with battery acid.
- Use manufacturer supplied or approved
replacement parts.
- All repairs must be performed by a qualified
service person.
- Avoid moving parts. Do not wear loose clothing
or jewelry and secure long hair.
- Do not power spray or hose off machine near
electrical components.
- Do not modify the machine from its original
design.
- Drive wheels off ground during test after drive
belt adjustment.
- All work must be done having enough visibility
and/or appropriate lighting.
- Wear personal protective equipment as needed.
6. When transporting machine:
- Turn machine power off and remove key.
- Get assistance when lifting machine.
- Use a loading ramp that will support the weight
of the machine.
- Do not wheel up or down stairs.
- Use tie-down straps to secure machine when
transporting by vehicle.
Onboard Battery Charger Information
The onboard battery charger's charging profile is
specifically configured for a 12V sealed GEL battery.
When installing a replacement battery it is important to
use the same battery type or damage to the battery
and/or charger may result.
For battery charger operating instructions, refer to the
battery charger manual supplied with the machine.
Tennant S9 (06-2016)

Technical Specifications

Model
Length
Width
Height
Weight
Sweeping Path Width
Main Brush Width
Side Brush Diameter
Hopper Capacity
Battery Capacity
Total Power Consumption
Battery Charger
Productivity Rate (Net)
Slope Maximum
Machine Vibration at Hand-arm *
Machine Vibration Uncertainty K *
Sound Pressure Level L *
pA
Sound Uncertainty K *
pA
Sound Power Level L +
WA
Uncertainly K *
WA
Protection Grade
Operation Temperature
* Values determined as per EN 60335-2-72

Machine Components

1. Vacuum, Side Brush, Main Brush Start Button
2. Side Brush, Main Brush Start Button
3. Vacuum, Main Brush Start Button
4. Battery Discharge Indicator
5. Hour Meter
6. Battery Charger Cord Storage Compartment
7. Battery Charger Outlet
8. Adjustable Control Handle
9. Adjustable Control Handle Lever
10. Drive Lever
11. Control Panel
12. Main Power Key Switch
13. Side Brush
14. Side Brush Lever
15. Internal Access Knob
16. Filter Shaker
17. Debris Hopper
18. Debris Hopper Release Lever
19. Dual Main Brushes
20. Anti-static Chain
English EN
S9
1085 mm / 43 in
799 mm / 31 in
658 mm / 26 in
137 kg / 300 lb
900 mm / 35 in
500 mm / 20 in
354 mm / 14 in
60 L / 15.9 Gal
12 V, 105 Ah (C5),
120Ah (C20)
12 VDC, 590 W, 34.3 A
100-240VAC 10A
3150 m²/hr / 23620 ft²/hr
2%
<2.5m/s 2
2
0.8 m/s
62 dBA
3 dBA
81 dB(A)
IPX3
min. -15°C, max. 40°C
3