Publicité
Periodic maintenance
3
3
4
2
5
1
19
Cleaning cooling area
This engine is air cooled engine. To maintain proper
cooling system efficiency, the fan screen, engine cool-
ing fins and inside of engine shrouds require cleaning
at every 200 hours use.
1
If not maintained, engine overheating can occur.
1. Fan screen
2. Engine cooling fin
Engine shroud (engine shroud removal may be required
3.
to properly clean all debris from the shroud area)
WARNING
• Do not operate engine without installed all parts.
• Do not spray water to wire harness or any electri-
cal components.
2
NOTICE
Overheating may reduce engine life.
3
Air filter
1.
Unhook the holding clips, and then remove the air
filter case cover from the air filter case.
1. Air filter case cover
2. Holding clip
3. Air filter case
2.
Pull the air filter element out.
1. Dust cap
2. Air filter case cover
3. Air filter element
4. Inner element
5. Air filter case
3.
Replace the air filter element and check condition
of inner element. If inner element is damaged or
Publicité
