Publicité
1
2
1
5.
Install the spark arrester.
1. Hole
2. Spark arrester lump
TIP
Align the spark arrester lump with the hole in the muf-
fler pipe.
2
6.
Install the screw, and then tighten the screw.
Engine oil replacement
WARNING
Avoid draining the engine oil immediately after
stopping the engine. The oil is hot and should be
handled with care to avoid burns.
1.
Place the multi-purpose engine on a level surface
and warm up the engine for several minutes. Then
stop the engine.
2.
Remove the oil filler cap.
1. Oil filler cap
1
3.
Place an oil pan under the engine. Remove the oil
drain bolt and gasket so that the oil can be com-
pletely drained.
1. Oil drain bolt
2. Gasket
TIP
Skip steps 4–6 if the oil filter cartridge is not being
replaced.
Periodic maintenance
16
Publicité
